I’m going to do away with the dim/dip resistor on my harness and will be removing the pink relay and joining up the two wires that feed the relay (can’t remember which ones at this time), what I’m wondering is do I need to join the two wires that went to the resistor and then still need to use the inline fuse that’s at the bulkhead. I’m also fitting the relay kit from Wired by Wilson for feeds for the halogen headlights. Thank you!
There is a post here -
http://www.theminiforum.co.uk/forums/topic/192468-dim-dip-by-pass/?hl=%2Bdimdip#entry3225138
hope this helps
Cheers for the link, I think I know now what the craic is. The resistor and relay can be removed along with joining the two wire at the relay base and the fuse at the brown feed is now not needed, I think!! Thanks again :o]
