Hi all, I know this has been covered. I’m putting a 998 A+ Gold seal into my mini but before I do I’m fitting a 12g295 and MG metro cam. Will standard rockers be ok to use or will they need to be a higher lift?
Thanks in advance
Standard rockers will be fine, they were on the Metro.
yep i used standard in my build
Cool thanks guys another cost not to worry about LOL
>
yep i used standard in my build
Yep standard. coopdog how did your build go? Is that cam producing results?
>
>
yep i used standard in my build
Yep standard. coopdog how did your build go? Is that cam producing results?
it going much better,
only done about 200 miles so i can only do like 3500-4000 rpm so i cant really tell what the top end is like yet
>
>
>
yep i used standard in my build
Yep standard. coopdog how did your build go? Is that cam producing results?
it going much better,
only done about 200 miles so i can only do like 3500-4000 rpm so i cant really tell what the top end is like yet
Not long before you can open her up then. That cam is really good from 3500 upwards, GL
