Hi,
just a quick one 
What size is the thread on the fittings for the brake lines which go into the regulator, rear T piece, and master cylender on an 88 mini?
Thanks
Chris
Except for the regulator they are all 3/8" UNF. HOWEVER, the regulator has METRIC threads which, I think, are 10 mm Metric Fine, but check that. Those different threads on the ends of brake pipes are a disgrace and are potentially fatal if you don’t know. I’ve known of several people who have tried to connet the pipes the wrong way around and ended up with, at best, a fluid leak which they have noticed and, at worst, stripped threads and possible brake failure later.
Just be aware of this.
I hope this helps.
ok, I think ill give minispares a ring and see if they know the regulator size for sure.
The reason im asking is im planing on makeing up a front to back line from goodridge hose, to run inside the car, as i think i damaged mine at MITP.
